[A*UG] Polycom and DHCP

[Brett Nemeroff]

Two questions:
1. As Chris pointed out, is your asterisk server staticly mapped into a
different subnet? see if 'ps ax|grep dhcpcd' reveals anything of interest
2. Are you sure your AAH box isn't running dhcpd <-- the DHCPD Server
-Brett

On Tue, February 21, 2006 10:26 am, Jim Freeze wrote:
> Hello
>
> Thanks all for the help last night. When I got home, I reconnected my
> system, and
> the phone did not connect to the AAH server. A quick investigation
> revealed
> the problem,
> but not the root cause. The problem is that the phone gets assigned
> 10.0.1.4while the
> AAH box gets assigned 192.168.15.5, even though both are on the same
> network.
>
> Here is the setup
> (hopefully gmail won't mess this up too much)
>
> AAH box: 192.168.15.5 -----+---+
>                            |hub|----rtr----nat/rtr--->
> ISP/internet
> Polycom: 10.0.1.4 ---------+---+
>
> I even unplugged the AAH box from the hub to make sure that the polycom
> was
> not getting an address from it.
>
> Any ideas why the two would find different dhcp servers? I really don't
> think a single
> dhcp server is serving out addresses on two different nets.
>
> Thanks
> --
> Jim Freeze
> _______________________________________________
> Austin-Asterisk-Users-Group mailing list
> Austin-Asterisk-Users-Group at bybent.com
> http://buzzard.onr.com/mailman/listinfo/austin-asterisk-users-group
> AAUG Web Site: http://aaug.bybent.com/
>